demolition hammer manufacturer and custom demolition hammers supplier from China Beisit Tools.

Founded in 1998, China Beisit Tools Manufacture Co., Ltd. is a specialized demolition hammer manufacturer of all kinds of power tools, air tools and pneumatic tools. Also, we have obtained ISO9001 international quality system certification, and our custom demolition hammers products are GS, CE and CB certified. Relying on superior quality and good service, we have become one of the 50 biggest power tool companies in China. With total capital of USD1,000,000, we have 300 highly skilled staff including 50 engineers engaged in accomplishing corporate goals, based on a production area of 130,000 square meters.

SDS-max bit system - tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate
Variable-speed dial - for controlled chipping applications
Constant Response Circuitry - - Provides soft-start - Maintains constant speed under load - Provides overload protection
Service Minder light - indicates when preventative maintenance is required
Vario-Lock positioning - rotates and locks chisel into 12 different positions to optimize working angle
Toolhounds know the old saying regarding a tool that does only one job, but does it like nothing else can. That’s certainly the case with this demolition hammer from Bosch. It may not be versatile, but it absolutely does its job.
This model is a favorite because it’s so user-friendly, weighing in at under 23 pounds and about as many inches in length – practically diminutive next to its competition. Its power, however, is not at all relative to its size, offering a range of impact energy from 4.4 to 18.4 ft./lbs. and up to 1,890 blows per minute, reducing tough concrete to dust.
Part of the beauty of this hammer is that it actually doesn’t want you to do the work for it; we found that exerting force on it actually slows you down. Instead, firm, steady pressure got us the best results. We particularly like the design of this hammer; instead of the traditional linear approach, Bosch built it more like a pistol, and that may (or may not, we’re not rocket scientists) be part of why so little vibration is felt. The rear handle is generously padded, and the auxiliary handle rotates 360 degrees so you can set it exactly where you need it. Another check in the ergonomics column comes from the electronic feedback system and the soft start it provides, keeping torque to a minimum.

20-pound demolition hammer with 10 Amp motor
Accepts commonly used 3/4-inch steel
Rubber grip side handles absorb vibration; can be secured in 4 positions
Includes demolition hammer, hex wrench, and plastic tool case
The Makita 20-pound demolition hammer features a powerful 10 Amp motor that provides fast and efficient operation. For user comfort and convenience, the rubber grip side handles absorb vibration and can be secured in four positions. This tool has been factory grease packed for reduced maintenance and it has an automatic brush cut-out when periodic servicing is due. It accepts commonly used 3/4-inch steel and measures 19-5/16-by-5-11/16-by-9-13/16 inches (length by width by height) and is backed by a one-year warranty.10 Amp motor pounds out 2000 blows per minute to efficiently break concrete, cut asphalt, dig out packed gravel and more. Accepts commonly used 3/4in. steel and sports a one-touch bit retainer for quick bit changes. Amps: 10, Blows Per Minute (BPM): 2,000, Impact Energy (ft. lbs.): 10.5, Impact Energy (J): 14.2, Accepts Bits (in.): 3/4 Hex Steel.