oscillating spindle sander manufacturer and custom oscillating spindle sanders supplier from China Beisit Tools.

Founded in 1998, China Beisit Tools Manufacture Co., Ltd. is a specialized oscillating spindle sander manufacturer of all kinds of power tools, air tools and pneumatic tools. Also, we have obtained ISO9001 international quality system certification, and our custom oscillating spindle sanders products are GS, CE and CB certified. Relying on superior quality and good service, we have become one of the 50 biggest power tool companies in China. With total capital of USD1,000,000, we have 300 highly skilled staff including 50 engineers engaged in accomplishing corporate goals, based on a production area of 130,000 square meters.

1/3 HP, 110V 4 Amp, 60Hz, 1725 RPM spindle speed. 2 1/2" Dust Port. Extra large 20" x 14" table. Includes spindle changing wrenches and table inserts. Spindle oscillates at 72 strokes per minute, 5/8" oscillating range
Nothing beats the finish of an Oscillating Spindle Sander for smoothing curved edges and when space is limited, you'll really appreciate this bench top version. With its large table surface and six different sanding drum diameters stowed neatly under the table, the right sanding drum is a quick change away for perfect results. Includes spindle changing wrenches, table inserts and 2 1/2" dust port. 1/3 HP. 1/3hp, 110V, 4amp, 60HZ. 1725RPM. Toggle on/off safety switch with locking tab. Extra large 20" x 14" Table. Spindle oscillates at 72 strokes per minute. Comes with six 4 1/2" tall sanding drums, three 80 grit sleeves (1/2", 1" and 2") three 150 grit sleeves (3/4", 1 1/2",and 3") and 6 table inserts. Approximate shipping weight 34lbs. All JET motors are totally enclosed and fan-cooled to prevent overheating and dust infiltration. This translates to longer motor life and less risk of a fire hazard than open motor housing--very important in such a dusty operation.

Boss spindle sander with complete spindle sander set; 18-inch diameter table. Heavy-duty, 1/4-horsepower motor; oscillating action; built-in dust collection; Cast-iron construction; rubber spindles. Includes sanding drum, sleeve, 4 spindles (1-inch, 1-1/2-inch, 2-inch, and 3-inch), drum plates, sleeves, table inserts
21 by 21 by 15-1/2 inches; 49 pounds; 2-year warranty. If only we'd had one of these when we built those doll cradles--and sanded all the little curves and crannies by hand! This beauty takes all the work out of jobs like that. No burn marks--ever--because of the oscillating action. Sure, you can chuck a little drum sander into your drill press, but you'll have to deal with that annoying gap between the drum and the table. This sander eliminates that. The large cast-iron table measures 18 inches in diameter and sits atop a 1/4-horsepower single-phase motor. A built-in dust collection fan draws down dust and chips through the table insert and into the dust-collection bag. There's room on board to store all the included accessory sanding drums and sleeves. It's light--just 45 pounds--and can be used as a portable sander or mounted to a stand or workbench through predrilled holes in the base.